GL Technologies is a leader in providing coating and lining solutions in the protecting of water purification facilities, waste treatment plants, secondary containment and similar municipally owned and privately owned facilities. A wide variety of coatings, all totally compatible with each other, are available for virtually every kind of substrate encountered in such structures.
GL’s 100% solids polyurethane and epoxy coatings offer very unique handling advantages. To the end user, this means a greater assurance of achieving the desired result on time and on budget. To the applicator, it means high throughput and fewer callbacks. Imagine, for example, coatings with these kind of leading edge handling characteristics:
- set at virtually any temperature, winter and summer
- are nonflammable, solvent free and as safe as house paint
- are self-priming
- can be applied in a single multi-pass coat
- set in minutes
- can be put into service within hours
- are easily touched up if damaged
- are non-dangerous goods for transportation
- require no post curing, ever.
Accompanying these handling advantages are a number of important performance advantages.
These include:
- superior adhesion
- resistance to chemical attack
- resistance to gouging and abrasion
- flexibility and resilience
- inertness and NSF61 compliance for potable water application
- freedom from embrittlement
- impermeability
- resistance to cathodic disbondment
- a number of national and international approvals
- a totally monolithic, seamless polymer sheet virtually fused to the substrate.
Examples of GL’s water and waste water solutions:
| Issue | Solution | Description |
|---|---|---|
| Aboveground, standard exterior application for UV and corrosion protection for a service life up to 5 years |
|
|
| Aboveground, standard exterior application for UV and corrosion protection for a service life up to 10 years |
|
|
| Aboveground, standard exterior application for UV and corrosion protection for a service life of 15 years and up |
|
|
| Buried or sub-buried, exterior corrosion protection |
|
|
| Corrosion under insulation (CUI) repair for operating temperatures of up to 250°C |
|
|
| Lining and immersion protection in standard potable water for operating temperatures up to 80°C |
|
|
| Lining and immersion protection in standard non-potable water and wastewater for operating temperatures up to 50°C |
|
|
| Lining and immersion protection for critical non-potable water applications for operating temperatures up to 80-100°C |
|
|
| Lining and immersion protection for very critical non potable applications for operating temperatures up to 190°C |
|
|
| Lining and immersion protection for highly abrasion application (sand, slurry, fast-flow water) for operating temperatures up to 65°C |
|
|
| Primer for coating and lining on concrete substrate |
|
|